Recessed Spray Basin

Product Code : BRBSFW

Recessed Spray Basin

Installation Instructions

The basin mixer is designed for equal and high pressure systems only. All pipework must be thoroughly flushed prior to installation. An inline filter must be fitted to prevent foreign particles damaging the ceramic cartridge.

Operating pressure: Max 1000Kpa

Hot supply temperature: 55-65’c

If connecting to a mains system, you will need to install restrictors to stop over spray when mixer is open full. The best way to do this is by installing Aqualine mini ball valves (with handles). These are available at your local plumbing merchant. Adjust the valves to restrict the water so there is no over spray when the mixer is on full.

* A hole 450 X 450mm is sufficent to recess the basin into the wall

Back To Basins